In Atlas Map I'm attempting to map out the SAN environment to include two switches, the 2 SAN controllers (8 eths), and the multiple NICs on the servers. However, when I add the two switches and the servers the connect now doesn't work. I went into the properties of the servers and dragged the iSCSI interface, however, it then reports the node isn't managed. These switches are in a separate VLAN. The node is managed with the resource monitored. Is this task even possible without exporting the MAC addresses from switch then changing the MAC to IP and add all interfaces and switch ports manually?
The disk performance is vital in the environment and so with a diagram and drill-downs to the active iSCSI server interface will help determine bottlenecks.
Thanks